Guangzhou Debo Machinery Mfg Co.,Limited
One stop solution for Post-press equipment; Professional factory for Paper cutting machine, Glue binding machine, Laminating machine and Blueprint machine
Add to Cart
Automatic fast speed laminating machine with auto cutting for paper and book laminating
Features
This machine covers a small area, is operated conveniently, run fast. It's equipped with automatic temperature-control and speed-regulation, automatic feeding. Several rolls or redundant rolls can be slit at one time, so this machine is regarded as a slitter.
The machine adopts pre-coated film as the material. It is widely used for lamination on the surface of window packing paper boxes, various books, maps, pictures, certificates, holographic cellphone etc. After the above products are laminated, they have the features of water-resistance, clear graphic arts and strong three-dimensional sense.
| TROUBLESHOOTING | ||
| Machine will Not turn on | a.Power switch is in “o” (Off) position b. Tripped circuit breaker. c. Blown main power fuse | a.Put the power switch to the “l” (On) position b. Reset the circuit breaker. c. Replace the fuse. |
| There is power, but the rollers are not turning after the “RUN” button is pressed | a.Safety cover is not closed. b.Paper guide is not installed correctly c.Blown motor fuse. | a.Close the safety cover to active the safety switch. b.Properly install the paper guide so that the micro switch is activated. c.Replace the motor fuse. |
| The unit is not heating up | a.The machine is in “COLD” mode. b.Set temperature is lower than the room temperature. | a.Switch to “HOT” mode. b.Raise the temperature according to the recommended film temperature. |
| The paper is not automatic feeding | a.The paper feeding roller is damaged. b.Paper board is too high | a.Change the roller b.Lower the paper board. |
| Many papers are feeding at the same time | a. Paper board is too low | a. Turn the paper board up. |
| Curled lamination: | The main roller temperatures are too low and/or lamination speed is too fast. | Raise the roller temperatures and/or lower the lamination speed. |
Specifications
| Item | DB-FM520 Hydraulic laminating machine AUTO cutting |
| Model no | DB-FM520 |
| Laminating width | 490mm |
| Laminating thickness | Unlimited |
| Laminating speed | 0-12000mm/min |
| Max.laminating temperature | 160 degree |
| Display | LED |
| Motor | AC motor |
| Heating power | 4000W |
| Motor power | 400W |
| Machine size | 800x1200x1200mm |
| Machine weight | 240kgs |
DB-FM520 laminating machine photo
